“Two Tier Container Racking – Single Bay, Adjustable Shelves, 550kg Capacity” has been added to your cart.
View cart -
$51.00
The powder coated container door stay is designed to hold a shipping container door open and prevent it from closing, particularly in windy conditions on exposed sites. The device is fitted to container doors without the use of tools and folds away when not in use. It is constructed from steel.
Key Features
-
$301.00
The standard container ramp is a lightweight removable ramp designed to enable wheeled equipment to access a container from ground level. The ramp assists with loading and unloading of materials and equipment. It measures 1m square and can be stored inside or outside the container.
Key Features
-
Lightweight and removable design
-
1m square size
-
Chequer plate finish for grip
-
No fixings required for normal use
-
Wider widths available for specific purposes
-
$155.00
The LED solar floodlight charges during the day via its built-in solar panel. At night, the PIR sensor turns on the floodlight when it detects movement. The unit is supplied with a powder coated lamppost designed to clamp into any of the four top container corner castings.
Key Features
-
8W LED lamp (960 lumens, 6500K)
-
PIR motion sensor (integrated)
-
Polycrystalline solar panel
-
14.8WH Li-ion battery (3.7V 4AH)
-
Plastic housing (IP65 rated)
-
Powder coated lamppost included
-
Clamps into container corner castings
-
Up to 8 hours of light when fully charged
-
No wiring required
-
$19.00
The dry stick is a moisture absorber designed to protect container contents from dampness. The stick stores up to 2 litres of water in a moisture protected membrane that prevents moisture from re-entering the container. A hook is included for hanging from standard container roof mounted lashing points.
Key Features
-
Stores up to 2 litres of water
-
Moisture protected membrane
-
Prevents re-entry of moisture into container
-
Hook for hanging from roof lashing points
-
Fits between wall corrugations
-
$409.00
The fast-fit racking is designed to assemble onto internal D-rings found on the ceiling of shipping containers. This set of shelving brackets allows both sides of a 20 ft container to be fitted with three tiers of shelving. The design leaves the floor area completely clear for long or wheeled items. All metalwork is powder coated.
Key Features
-
Three tier configuration
-
2 bays per kit (single side)
-
Hooks onto internal ceiling D-rings
-
458mm deep shelves
-
250kg weight rating per bracket arm per shelf
-
500kg weight rating per bracket (total of all three shelves)
-
Powder coated finish
-
Clear floor area below bottom shelf
-
$245.00
The fast-fit racking is designed to assemble onto internal D-rings found on the ceiling of shipping containers. This set of shelving brackets allows both sides of a 10 ft container to be fitted with three tiers of shelving. The design leaves the floor area completely clear for long or wheeled items. All metalwork is powder coated.
Key Features
-
Three tier configuration
-
Single bay per kit (single side)
-
Hooks onto internal ceiling D-rings
-
Powder coated finish
-
Clear floor area below bottom shelf
-
$120.00
The white motion sensor activated magnetic ceiling light emits 300 lumens from LED lights. The unit has a wireless design and attaches to walls or ceilings via magnet or screw fixing. The motion sensor activates only when darkness is detected. The light requires 4 x D batteries, which are supplied with the unit.
Key Features
-
PIR motion sensor
-
300 lumens output
-
Magnetic or screw fixing options
-
Wireless design
-
Activates only in darkness
-
6m motion detection range
-
20 second illumination after last motion detected
-
Battery operated (4 x D batteries included)
-
$405.00
The three tier container racking system is designed for installation at the rear end of shipping containers. This single bay kit has a length of 1850mm and comprises two pre-assembled 2m high and 600mm wide end frames connected by two beams per shelf. Each shelf has a capacity of 550kg.
Key Features
-
Three tier configuration
-
Single bay (1850mm)
-
Adjustable shelf heights (50mm increments)
-
550kg capacity per shelf
-
Pre-assembled end frames (2m high x 600mm wide)
-
Beams with safety clips
-
Powder coated steel (blue and orange)
-
25mm chipboard shelf included
-
$415.00
The three tier container racking system is designed for installation inside shipping containers. This single bay kit is suitable for 10ft containers and can also be used in 20ft, 30ft, and 40ft containers. The racking comprises two pre-assembled 2m high and 600mm wide end frames connected by two beams per shelf. Each shelf has a capacity of 550kg.
Key Features
-
Three tier configuration
-
Single bay (2250mm)
-
Adjustable shelf heights (50mm increments)
-
550kg capacity per shelf
-
Pre-assembled end frames (2m high x 600mm wide)
-
Beams with safety clips
-
Powder coated steel (blue and orange)
-
25mm chipboard shelf included
-
$310.00
The two tier container racking system is designed for installation inside shipping containers. This single bay kit is suitable for 10ft containers and can also be used in 20ft, 30ft, and 40ft containers. The racking comprises two pre-assembled 2m high and 600mm wide end frames connected by two beams per shelf. Each shelf has a capacity of 550kg.
Key Features
-
Two tier configuration
-
Single bay (2250mm)
-
Adjustable shelf heights (50mm increments)
-
550kg capacity per shelf
-
Pre-assembled end frames (2m high x 600mm wide)
-
Beams with safety clips
-
Powder coated steel (blue and orange)
-
25mm chipboard shelf included
